Kinusaiga Ornament

lots of ornaments

Let’s make Kinusaiga Ornaments! But first, what is “Kinusaiga”?

Kinusaiga is a Japanese term that means “silk picture”. It is a textile art where pictures are created without a single needle, thread, or stitch. This type of art form was invented in Japan in the 1980s by a professor and artist Maeno Takashi.

The technique has evolved a lot over the years into many craft projects and home decor.

supplies you need

kinusaiga ornaments supply list

You don’t really need a whole lot to make these ornaments! Download the free pattern and tutorial for the exact list of tools and supplies you need- along with links! 

Prepping the Foam Ball

The first thing you need to do is to cut sections into your foam ball. You are not cutting all the way through the ball, just the depth of the blade on your exacto knife.

The foam balls usually have a mark or indent at the top and bottom, giving you a reference point for where to start and stop your sections. If it doesn’t have these, use a pen and mark a dot at the top and bottom. This is where you will start and stop your section cuts. Cut 8 “orange wedge” sections. 

cutting into the foam ball
continue cutting all sections into foam ball

Select 8 fabrics for your ornament. Make sure that each fabric can cover an orange wedge section of the ball with at least 1/4″ extra all around. 

I used fabric from a charm pack, which are 5″ squares. These are the perfect sizes! This charm pack is from my Gingerbread Lane fabric line with Moda.

select fabric for kinusaiga ornament

Kinusaiga technique

The actual technique for making Kinusaiga Ornaments is going to be the same thing repeated for every section. Pick a section to start with. Make sure the fabric covers the section and has at least 1/4″ of room around the section.

Using the flathead screwdriver (or butter knife), start shoving the fabrics into the cuts that you made with the exacto knife. Go all they way around one orange wedge section. 

tuck fabric into first wedge

Next, trim all the excess fabric away from the foam ball. Cut as close as you can without cutting into the foam. Then, use the screwdriver to shove the remaining raw edges down into the cracks.

trim excess fabric
one section of the kinusaiga ornament done

Continue following those same steps with each section of the foam ball. You will have 8 wedges. If you get really confident and want to try carving different designs into your ornament- you can! There are no limits to what you can create using this technique!

Adding Ribbon

Adding a ribbon to our Kinusaiga ornaments so they can hang on the tree its just a little tricky! Download the free pattern tutorial for the step by step instructions with photos for reference!

kinusaiga ornament completed
lots of ornaments

blog hop links!

Check out the other fun holiday projects in the Christmas Blog Hop! 

More Topics